Safetyware group
ACHIEVEMENTS/MILESTONES
2003 – Established Safetyware Sdn. Bhd. In Malaysia.
2004 – First office located at Taman Saga Jaya, about 3000sq. ft. with 4 full-time employees
2005 – Established Kuala Lumpur Office
2006 – Introduction of RHINO SHOE safety footwear – Our in-house brand which is positioned as high quality safety shoes with affordable price
2008 – Established Johor Office
2010 – Established Malacca Office
2010 – Acquired Technical Rubber (M) Sdn. Bhd., renamed it as Safetyware Industries Sdn. Bhd., and ventured into manufacturing of safety apparel, signage & labels.
2010 – Achieved ISO 9001:2008 QMS certification
2011 – Acquired a 2-acre industrial land in Bukit Minyak and completed the 1st phase construction with build-up area of 20,000 sq. ft.
2011 – Established Safetyware EHS Consultancy Sdn. Bhd. to focus on EHS training & consultancy service
2012 – Established Safetyware (SG) Pte. Ltd. in Singapore
2013 – Established distribution network in more than 30 countries
2017 – Completed Penang HQ factory expansion with total build-up area of 75,000 sq.ft.
2017 – Introduction of new RHINO SHOE Ultranite series, made with Direct Vulcanised Technology (DVT)
2018 – Expansion of safety apparel production – added the capability of heat transfer & embroidery
2018 – Established rubber compounding section to produce the NBR compound needed for safety shoe production
2018 – Established a R&D laboratory to focus on product development and quality control
2019 – Established Pahang office
2019 – Established Sarawak office
2019 – Became the licensed manufacturer of Lenzing Flame Resistant apparel
2020 – Established Sabah office
2020 – Incorporated Safetyware Australia Pty Ltd
2020 – Established Hygiene & Sanitation production — to produce sanitizers and disinfectant
2020 – Established masks production — to produce face masks & particulate respirators (N95/FFP2/P2 masks)
2020 – Established the production of Non-Woven Disposable Products (Mob Cap)
2020 – Established the production of Plastic Disposable Products (PE Gloves, CPE Shoe Cover)
2020 – Expanded the safety apparel production by tripling the number of sewing machines & equipment
2020 – Set-up Safetyware Store Online – Our own flagship online store to capture the consumer market
2020 – Expanded the production capability of Quicksign Sdn. Bhd. by adding additional HP Latex Printer, Digital Printer, LaserCutting/ Engraving machine and UV Flatbed machine. Product range has been significantly widen
2021 – Expanded face mask production capacity with added machines & equipment
2021 – Set up retail store in Melaka
2021 – Obtained certifications from Medical Device Authorities (MDA) on face masks / respiratory protection products
2021 – Established new plant (P2) for hygiene & sanitisation production
2021 – Obtained certifications from National Pharmaceutical Regulatory Agency (NPRA) on hygiene & sanitisation products
2021 – Established new plant (P3) for disposable plastic & non-woven products and plastic injection products
2021 – Expanded safety footwear production to add-on Cemented Safety Shoes, PU Safety Shoes, and PVC Wellington Boot.
SAFETYWARE GROUP
2004 – First office located at Taman Saga Jaya, about 3000sq. ft. with 4 full-time employees
2005 – Established Kuala Lumpur Office
2006 – Introduction of RHINO SHOE safety footwear – Our in-house brand which is positioned as high quality safety shoes with affordable price
2008 – Established Johor Office
2010 – Established Malacca Office
2010 – Acquired Technical Rubber (M) Sdn. Bhd., renamed it as Safetyware Industries Sdn. Bhd., and ventured into manufacturing of safety apparel, signage & labels.
2010 – Achieved ISO 9001:2008 QMS certification
2011 – Acquired a 2-acre industrial land in Bukit Minyak and completed the 1st phase construction with build-up area of 20,000 sq. ft.
2011 – Established Safetyware EHS Consultancy Sdn. Bhd. to focus on EHS training & consultancy service
2012 – Established Safetyware (SG) Pte. Ltd. in Singapore
2013 – Established distribution network in more than 30 countries
2017 – Completed Penang HQ factory expansion with total build-up area of 75,000 sq.ft.
2017 – Introduction of new RHINO SHOE Ultranite series, made with Direct Vulcanised Technology (DVT)
2018 – Expansion of safety apparel production – added the capability of heat transfer & embroidery
2018 – Established rubber compounding section to produce the NBR compound needed for safety shoe production
2018 – Established a R&D laboratory to focus on product development and quality control
2019 – Established Pahang office
2019 – Established Sarawak office
2019 – Became the licensed manufacturer of Lenzing Flame Resistant apparel
2020 – Established Sabah office
2020 – Incorporated Safetyware Australia Pty Ltd
2020 – Established Hygiene & Sanitation production — to produce sanitizers and disinfectant
2020 – Established masks production — to produce face masks & particulate respirators (N95/FFP2/P2 masks)
2020 – Established the production of Non-Woven Disposable Products (Mob Cap)
2020 – Established the production of Plastic Disposable Products (PE Gloves, CPE Shoe Cover)
2020 – Expanded the safety apparel production by tripling the number of sewing machines & equipment
2020 – Set-up Safetyware Store Online – Our own flagship online store to capture the consumer market
2020 – Expanded the production capability of Quicksign Sdn. Bhd. by adding additional HP Latex Printer, Digital Printer, LaserCutting/ Engraving machine and UV Flatbed machine. Product range has been significantly widen
2021 – Expanded face mask production capacity with added machines & equipment
2021 – Set up retail store in Melaka
2021 – Obtained certifications from Medical Device Authorities (MDA) on face masks / respiratory protection products
2021 – Established new plant (P2) for hygiene & sanitisation production
2021 – Obtained certifications from National Pharmaceutical Regulatory Agency (NPRA) on hygiene & sanitisation products
2021 – Established new plant (P3) for disposable plastic & non-woven products and plastic injection products
2021 – Expanded safety footwear production to add-on Cemented Safety Shoes, PU Safety Shoes, and PVC Wellington Boots.
SAFETYWARE GROUP
2004 – First office located at Taman Saga Jaya, about 3000sq. ft. with 4 full-time employees
2005 – Established Kuala Lumpur Office
2006 – Introduction of RHINO SHOE safety footwear – Our in-house brand which is positioned as high quality safety shoes with affordable price
2008 – Established Johor Office
2010 – Established Malacca Office
2010 – Acquired Technical Rubber (M) Sdn. Bhd., renamed it as Safetyware Industries Sdn. Bhd., and ventured into manufacturing of safety apparel, signage & labels.
2010 – Achieved ISO 9001:2008 QMS certification
2011 – Acquired a 2-acre industrial land in Bukit Minyak and completed the 1st phase construction with build-up area of 20,000 sq. ft.
2011 – Established Safetyware EHS Consultancy Sdn. Bhd. to focus on EHS training & consultancy service
2012 – Established Safetyware (SG) Pte. Ltd. in Singapore
2013 – Established distribution network in more than 30 countries
2017 – Completed Penang HQ factory expansion with total build-up area of 75,000 sq.ft.
2017 – Introduction of new RHINO SHOE Ultranite series, made with Direct Vulcanised Technology (DVT)
2018 – Expansion of safety apparel production – added the capability of heat transfer & embroidery
2018 – Established rubber compounding section to produce the NBR compound needed for safety shoe production
2018 – Established a R&D laboratory to focus on product development and quality control
2019 – Established Pahang office
2019 – Established Sarawak office
2019 – Became the licensed manufacturer of Lenzing Flame Resistant apparel
2020 – Established Sabah office
2020 – Incorporated Safetyware Australia Pty Ltd
2020 – Established Hygiene & Sanitation production — to produce sanitizers and disinfectant
2020 – Established masks production — to produce face masks & particulate respirators (N95/FFP2/P2 masks)
2020 – Established the production of Non-Woven Disposable Products (Mob Cap)
2020 – Established the production of Plastic Disposable Products (PE Gloves, CPE Shoe Cover)
2020 – Expanded the safety apparel production by tripling the number of sewing machines & equipment
2020 – Set-up Safetyware Store Online – Our own flagship online store to capture the consumer market
2020 – Expanded the production capability of Quicksign Sdn. Bhd. by adding additional HP Latex Printer, Digital Printer, LaserCutting/ Engraving machine and UV Flatbed machine. Product range has been significantly widen
2021 – Expanded face mask production capacity with added machines & equipment
2021 – Set up retail store in Melaka
2021 – Obtained certifications from Medical Device Authorities (MDA) on face masks / respiratory protection products
2021 – Established new plant (P2) for hygiene & sanitisation production
2021 – Obtained certifications from National Pharmaceutical Regulatory Agency (NPRA) on hygiene & sanitisation products
2021 – Established new plant (P3) for disposable plastic & non-woven products and plastic injection products
2021 – Expanded safety footwear production to add-on Cemented Safety Shoes, PU Safety Shoes, and PVC Wellington Boots.